High and low temperature resistanceShell Series Mosaic Tile Factory In ChinaFor House Decoration,Natural shell
Quick Details:
1) Suitable for indoor and outdoor walls, building exteriors and
swimming pools and so on
2) High and low temperature resistance
3) Good quality adhesive which stick very firmly and avoid the
pieces go off.
4) Washable and durable
5) Dust-proof and the color never fade
6) Acid-proof and alkali-proof
7) Available in different colors and sizes
8) Available in different shapes such as square, round, circular
and other abnormities you want
9) Different kinds of mosaics can be mixed for your individual
style
| Item | Shell Series Mosaic Tile |
| Material | Natural shell |
| Size | 300x300mm,200x200mm etc.. |
| Application | Suitable for interior and exterior, floor and wall, , hotels,
houses (Wall backsplash, TV setting wall,living room, bathroom, kitchen,etc.) |
| Package | Cartons and wooden pallet |
| Delivery Time | 30 days after receiving the deposit |
| Advantages | 1.Dust-proof and Excellent color fade resistance, acid-proof and
alkali-proof |
2.Not only suitable for outdoor and indoor decoration, but also dry
and wet places such as walls, kitchens and so on. |
| 3.Easy to clean, high and low temperature resistant,fade
resisitance |
| 4. Easy to install with standard tool and material |
| 5. Varies type and style : Simple, elegant |
| 6.Stable quality good for projects |
Construction Steps of glass mosaic:
1. We suggest adopting professional adhesives and joint filler, and
parts of our products adopt neutral adhesives.
2. Use special ash knife to sweep 2-3mm thickness adhesives after
cleaning the pavement surface.
3. Use dentate trowel carve to score out waviness on the flat mushy
adhesive.
4. Paving mosaic pay attention to align the joints between mosaics
with the joints between the product network adhibits.
5.Tenderly pat the surface of the mosaic and leveling treatment to
make sure it is adhesive evenly.
6. About 20 hours later when mosaic is totally adhesive, use the
special sponge knife to fill the joint fillers in the gaps.
(Soft tool to prevent damaging product surface)
7.After 30 minutes, when the joint filler is semi-dry, use high
density sponge to fill into joint about 1-2mm,
which can better show the highlight effect of the product.
8.Use dry towel to clean and finish the construction finally.
